Wargaming Surplus Sell-off!!!

I've been unable to paint on account of my back surgery and I'm clearing out some additional non-essential miniatures - both painted and unpainted.

Checkout eBay if you're interested in getting some great deals!


Some of the stuff includes:

1/6000 Ships - Painted


Timecast 6mm Stalingrad Buildings


Lots of 1/6000 Figurehead Ships - Unpainted


Lots of Picoarmor/Oddzial Osmy - USN and IJN


1/600 Picoarmor Aircraft - Painted with flight stands



Taking a Break... Back Surgery


It's been a few months since I've posted any new work.  In fact, I think I've had only 1 or 2 posts in the past year.  This has been due to a heavy schedule and also chronic back problems that have plagued me for the past several years.

This reduction in posts is going to continue for awhile and perhaps will drastically change my ability to enjoy this hobby.  A few weeks ago, I underwent back surgery as these chronic issues escalated and I began to lose feeling and muscle function in my leg and foot.  Surgery went well and I'll be spending the next few months trying to become a new man.

If any of you have experienced something similar and have found a way to enjoy this hobby AFTER something like back surgery, let me know...  I'm interested in hearing how you did it.  I read and watch many of your blogs and websites, I'll be continuing to do that as I find it very enjoyable!

Take Care!
Tanner


Holiday Painting - 1/6000 Figurehead ships

It's been a long time since I've posted anything...  I've just been too busy.  However, I did get a chance to paint up some IJN and USN Naval Forces for my Solomons campaign.  My son and I had a great slugging match (using Axis and Allies Miniatures rules) with the cruisers involved in the Battle of Savo Island.  This time around, the USN had a pretty healthy advantage; the hard hitting USN Cruisers punished my IJN forces and all of my long lance torpedoes missed!  doh!

With not much "free time" I'm enjoying the quick painting times on 1/6000 figurehead ships :)

Happy New Years everyone!


Round or Square?

I spent some time today painting some Picoarmor that I had purchased a couple of years ago.  This time I tried some different painting techniques and I used square metal bases.

What do you think?  Do you like the round or the square/rectangle bases better?  I've been debating all day which I like better and I can't make up my mind.  I think the round look cooler, but the rectangle are likely more practical for gaming.

Round bases were painted a year or two ago...  square bases painted today:


Lots of Hobby Items on eBay!!! GHQ, CinC, and Airbrushes.

I'm on vacation this week and I've been doing some re-organizing of my hobby space.  There are lots of items that I have barely used and/or may never use or paint.  As a result, I've posted quite a few very nice hobby items on eBay at steep discounts.  Swing by and check them out if you're interested.

WWIICentral on eBay

For example...  Airbrushes:


GHQ and CinC Blister Packs:



And a few other items...

Hope you all are having a nice summer :)

Guadalcanal Gaming Mat and 1/2400 Ships

It's been quite awhile since I've posted anything...  I have been productive, but I've been lazy when it comes to the blog :(

Here's what I've been doing:  Prototyping a new "Iron Bottom Sound" Gaming Mat for my 1/6000 Navies (which are slowly growing).  I created it with and without hexes...  Let me know what you think.  I'm considering some other potentials too:  Midway, Samar, New Georgia (and surrounding Islands), etc.  The Mats are 60 inches x 40 inches.






And...  I also spent some time painting several GHQ 1/2400 Ships for a good friend.  I don't have my light box working so I can't share my usual sharp photos.

Regia Marina:


And several Royal Navy Capital Ships:



I'm not much for words today but hopefully the photos are enjoyable :)

Thanks for stopping in!

Tanner

Rubicon Models 28mm Tanks - Gifts from Santa

I'm happy to report that I received a handful of World War II Miniatures this year for Christmas!  I also got lucky and received George Nipe's book on Kursk "Blood, Steel, and Myth" so all-in-all I made out pretty well :)

Earlier today I posted a photo review of the Warlord 28mm Plastic Infantry I received.  Here is a run down on the tanks I got.

I received 2 Rubicon Models 28mm Kits.  The first being a Panzer IV box set that allows you to model several different variants (F1, F2, G, and H).  There are instructions and a decal sheet included...  which is nice for me since I don't have many 28mm decal sheets.


I have to say that I really like these kits and I'm happy with how they assembled.  There are some limitations with the kits (like the extra-wide inner road wheels); but I am more than OK with this considering I don't want to spend a week gluing a more detailed kit together.


Details are sharp and crisp and there aren't very many mold lines to clean.  There were a few on the gun barrel, muffler, etc. but they cleaned off easily.


All of the parts fit together smoothly and I didn't have any problems with poor fit.


Once together and glued, I was pretty impressed with how solid it felt.  I have a Resin Elefant that is a few years old (that I glued but never painted, lol); most of the details have busted off over the past few years with normal handling.  I don't anticipate these details will be snapping off.


Putting this together reminded me of assembling PSC Vehicles...


I didn't do any measuring, but to the eyeball, Warlord Plastic Infantry look good in comparison.


The second vehicle I received was the Rubicon T-34; you can model a couple of different early turret variants.


As with the Panzer IV, I really liked the kit.  I've heard some complaints of the tracks being a little inaccurate, but this isn't really a concern for me since I usually model tracks with a little dirt on them.


The sprue includes a handful of different options that you can model on the hull to your preference.  I kept mine fairly clean.


Parts fit together very well and I had no problems gluing and assembling...  took me about 30 minutes but I could have done it much faster.


I think Rubicon did a very nice job with the rear deck detail.  It is a good combination of detail that stands out but isn't too exaggerated.


Top down view...


And with some Warlord 28mm Infantry...


This isn't much of a "technical" review and I'm not the type of collector/painter/gamer that worries about complete accuracy.  But as a consumer, I give these an A+.  They are sharp, easy to assemble, solid, and they look great!  I hope I can say the same once I've had a chance to paint them.

I am looking forward to more products from Rubicon!

Happy New Year!

Tanner
Related Posts Plugin for WordPress, Blogger...